home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Winzipper
/
Winzipper_ISO.iso
/
nt4.0 server
/
TK550172.PP_
/
tk550172.ppd
Wrap
PostScript Printer Description
|
1996-06-12
|
15KB
|
532 lines
*PPD-Adobe: "4.3"
*% Adobe Systems PostScript(R) Printer Description File
*% Copyright (c) Tektronix, Incorporated. All rights reserved.
*% Tektronix (R) is a registered trademark of Tektronix, Inc.
*% TekColor TM is a trademark of Tektronix, Inc.
*% Phaser (R) is a registered trademark of Tektronix, Inc., for color
*% printers and related products.
*FormatVersion: "4.3"
*FileVersion: "2.0"
*LanguageEncoding: ISOLatin1
*LanguageVersion: English
*Product: "(Phaser 550)"
*PSVersion: "(2015.105) 9"
*Manufacturer: "Tektronix"
*ModelName: "Tektronix Phaser 550"
*ShortNickName: "Tektronix Phaser 550"
*NickName: "Tektronix Phaser 550"
*PCFileName: "TK550172.PPD"
*% === Installable Options ===========
*OpenGroup: InstallableOptions/Options Installed
*OpenUI *InstalledMemory/Memory Configuration: PickOne
*DefaultInstalledMemory: None
*InstalledMemory None/Standard 8 MB RAM: ""
*InstalledMemory 12Meg/12 MB Total RAM: ""
*InstalledMemory 16Meg/16 MB Total RAM: ""
*InstalledMemory 24Meg/24 MB Total RAM: ""
*InstalledMemory 28Meg/28 MB Total RAM: ""
*InstalledMemory 40Meg/40 MB Total RAM: ""
*InstalledMemory 44Meg/44 MB Total RAM: ""
*InstalledMemory 56Meg/56 MB Total RAM: ""
*InstalledMemory 72Meg/72 MB Total RAM: ""
*CloseUI: *InstalledMemory
*OpenUI *Option1/Optional Hard Drive: Boolean
*DefaultOption1: False
*Option1 True/Installed: ""
*Option1 False/Not Installed: ""
*CloseUI: *Option1
*OpenUI *Option2/Optional Network Card: PickOne
*DefaultOption2: None
*Option2 None/Not Installed: ""
*Option2 P1/EtherTalk, NetWare and TCP/IP: ""
*Option2 P2/TokenTalk, NetWare and TCP/IP: ""
*Option2 P3/LocalTalk and Serial: ""
*CloseUI: *Option2
*OpenUI *Option3/Optional Lower Trays: Boolean
*DefaultOption3: False
*Option3 True/Installed: ""
*Option3 False/Not Installed: ""
*CloseUI: *Option3
*CloseGroup: InstallableOptions
*% === Constraints ===================
*UIConstraints: *Option3 False *InputSlot Middle
*UIConstraints: *Option3 False *InputSlot Lower
*UIConstraints: *InstalledMemory None *PageSize Legal
*UIConstraints: *InstalledMemory None *PageRegion Legal
*UIConstraints: *InputSlot Middle *Option3 False
*UIConstraints: *InputSlot Lower *Option3 False
*UIConstraints: *PageSize Legal *InstalledMemory None
*UIConstraints: *PageRegion Legal *InstalledMemory None
*% === Basic Device Capabilities ============
*LanguageLevel: "2"
*Protocols: BCP
*FreeVM: "2000000"
*VMOption None/Standard 8 MB RAM: "2000000"
*VMOption 12Meg/12 MB Total RAM: "4500000"
*VMOption 16Meg/16 MB Total RAM: "8100000"
*VMOption 24Meg/24 MB Total RAM: "6000000"
*VMOption 28Meg/28 MB Total RAM: "8500000"
*VMOption 40Meg/40 MB Total RAM: "5900000"
*VMOption 44Meg/44 MB Total RAM: "8500000"
*VMOption 56Meg/56 MB Total RAM: "17900000"
*VMOption 72Meg/72 MB Total RAM: "4200000"
*ColorDevice: True
*DefaultColorSpace: CMYK
*AccurateScreensSupport: True
*SuggestedJobTimeout: "0"
*SuggestedWaitTimeout: "300"
*SuggestedManualFeedTimeout: "60"
*1284Modes Parallel: Compat Nibble
*1284DeviceID: "
MANUFACTURER:Tektronix;COMMAND SET:Adobe Level 2 PostScript;
MODEL:Phaser 550;CLASS:Printer;DESCRIPTION:
Phaser 550 Color Laser Printer, PostScript Level 2, Letter/Legal/A4 Size;
COMPATIBLE_ID:"
*End
*TTRasterizer: Type42
*?TTRasterizer: "
save
42 /FontType resourcestatus
{ pop pop (Type42)} {pop pop (None)} ifelse = flush
restore"
*End
*Emulators: hpgl
*StartEmulator_hpgl: "currentfile /hpgl statusdict /emulate get exec "
*StopEmulator_hpgl: "<1B7F>0"
*FileSystem: True
*?FileSystem: "
save false
(%disk?%)
{ currentdevparams dup /Writeable known
{ /Writeable get {pop true} if } {pop} ifelse
} 10 string /IODevice resourceforall
{(True)}{(False)} ifelse = flush
restore"
*End
*Throughput: "14"
*Password: "(0)"
*ExitServer: "
count 0 eq
{ false } { true exch startjob } ifelse
not
{ (WARNING: Cannot modify initial VM.) =
(Missing or invalid password.) =
(Please contact the author of this software.) = flush quit
} if"
*End
*Reset: "
count 0 eq
{ false } { true exch startjob } ifelse
not
{ (WARNING: Cannot reset printer.) =
(Missing or invalid password.) =
(Please contact the author of this software.) = flush quit
} if
systemdict /quit get exec
(WARNING : Printer Reset Failed.) = flush"
*End
*DefaultResolution: 600dpi
*?Resolution: "
save currentpagedevice
/HWResolution get 0 get ( ) cvs print (dpi) = flush restore"
*End
*% Halftone Information =================
*DefaultHalftoneType: 9
*ScreenFreq: "60.0"
*ScreenAngle: "0.0"
*DefaultScreenProc: Null
*ScreenProc Null: "{}"
*DefaultTransfer: Null
*Transfer Null: "{ }"
*Transfer Null.Inverse: "{ 1 exch sub }"
*% Tray Selection ============
*OpenUI *InputSlot: PickOne
*OrderDependency: 10 AnySetup *InputSlot
*DefaultInputSlot: Paper
*InputSlot Upper: "
(<<) cvx exec
/MediaPosition 0
/MediaType null
/TraySwitch false
/ManualFeed false
(>>) cvx exec setpagedevice"
*End
*InputSlot Middle: "
(<<) cvx exec
/MediaPosition 1
/MediaType null
/TraySwitch false
/ManualFeed false
(>>) cvx exec setpagedevice"
*End
*InputSlot Lower: "
(<<) cvx exec
/MediaPosition 2
/MediaType null
/TraySwitch false
/ManualFeed false
(>>) cvx exec setpagedevice"
*End
*InputSlot Paper: "
(<<) cvx exec
/MediaPosition null
/MediaType (Paper)
/TraySwitch true
/ManualFeed false
(>>) cvx exec setpagedevice"
*End
*InputSlot Transparency: "
(<<) cvx exec
/MediaPosition null
/MediaType (Transparency)
/TraySwitch true
/ManualFeed false
(>>) cvx exec setpagedevice"
*End
*InputSlot ManualPaper/Manual Paper: "
(<<) cvx exec
/MediaPosition null
/MediaType (Paper)
/TraySwitch false
/ManualFeed true
(>>) cvx exec setpagedevice"
*End
*InputSlot ManualTransparency/Manual Transparency: "
(<<) cvx exec
/MediaPosition null
/MediaType (Transparency)
/TraySwitch false
/ManualFeed true
(>>) cvx exec setpagedevice"
*End
*?InputSlot: "
save
currentpagedevice /MediaPosition get
dup null eq
{ pop currentpagedevice /MediaType get
dup null eq
{ pop (Upper) }
{ dup (Paper) eq
{ pop currentpagedevice /ManualFeed get
{ (ManualPaper) }
{ (Paper) } ifelse
}
{
(Transparency) eq
{ currentpagedevice /ManualFeed get
{ (ManualTransparency) }
{ (Transparency) } ifelse
}
{ (Unknown) } ifelse
} ifelse
} ifelse
}
{
dup 0 eq
{ pop (Upper) }
{ dup 1 eq
{ pop (Middle) }
{ 2 eq
{ (Lower) }
{ (Unknown) } ifelse
} ifelse
} ifelse
} ifelse
= flush restore"
*End
*CloseUI: *InputSlot
*% Paper Handling ===================
*% Use these entries to set paper size most of the time, unless there is
*% specific reason to use PageRegion.
*OpenUI *PageSize: PickOne
*OrderDependency: 20 AnySetup *PageSize
*DefaultPageSize: Letter
*PageSize Letter: "(<<) cvx exec /PageSize [612 792] /ImagingBBox null
(>>) cvx exec setpagedevice"
*End
*PageSize Legal: "(<<) cvx exec /PageSize [612 1008] /ImagingBBox null
(>>) cvx exec setpagedevice"
*End
*PageSize A4: "(<<) cvx exec /PageSize [595 842] /ImagingBBox null
(>>) cvx exec setpagedevice"
*End
*?PageSize: "
save currentpagedevice /PageSize get aload pop
2 copy gt {exch} if (Unknown)
(<<) cvx exec
[612 792] (Letter)
[612 1008] (Legal)
[595 842] (A4) (>>) cvx exec
{ exch aload pop 4 index sub abs 5 le exch 5 index sub abs 5 le and
{ exch pop exit } { pop } ifelse
} bind forall = flush pop pop
restore"
*End
*CloseUI: *PageSize
*% These entries will set up the frame buffer. Usually used with manual feed.
*OpenUI *PageRegion: PickOne
*OrderDependency: 30 AnySetup *PageRegion
*DefaultPageRegion: Letter
*PageRegion Letter: "(<<) cvx exec /PageSize [612 792] /ImagingBBox null
(>>) cvx exec setpagedevice"
*End
*PageRegion Legal: "(<<) cvx exec /PageSize [612 1008] /ImagingBBox null
(>>) cvx exec setpagedevice"
*End
*PageRegion A4: "(<<) cvx exec /PageSize [595 842] /ImagingBBox null
(>>) cvx exec setpagedevice"
*End
*CloseUI: *PageRegion
*% The following entries provide information about specific paper keywords.
*DefaultImageableArea: Letter
*ImageableArea Letter: "10.32 15.9 601.68 776.22"
*ImageableArea Legal: "10.32 16.3801 601.68 991.74"
*ImageableArea A4: "13.44 14.46 581.76 828.54"
*?ImageableArea: "
save
/cvp { ( ) cvs print ( ) print } bind def
/upperright {10000 mul floor 10000 div} bind def
/lowerleft {10000 mul ceiling 10000 div} bind def
newpath clippath pathbbox
4 -2 roll exch 2 {lowerleft cvp} repeat
exch 2 {upperright cvp} repeat flush
restore"
*End
*% These provide the physical dimensions of the paper (by keyword)
*DefaultPaperDimension: Letter
*PaperDimension Letter: "612 792"
*PaperDimension Legal: "612 1008"
*PaperDimension A4: "595 842"
*RequiresPageRegion All: True
*% TKColor Selections ===================
*OpenUI *TKColor/Color Correction: PickOne
*OrderDependency: 40 AnySetup *TKColor
*DefaultTKColor: VividColor/Vivid Color
*TKColor NoAdjust/None: "
(<<) cvx exec
/DeviceRenderingInfo (<<) cvx exec
/Type 2
/VirtualColorDevice null
(>>) cvx exec
(>>) cvx exec setpagedevice"
*End
*TKColor VividColor/Vivid Color: "
(<<) cvx exec
/DeviceRenderingInfo (<<) cvx exec
/Type 2
/VirtualColorDevice (<<) cvx exec
/Type 3
/ColorTransform /TekBlue
(>>) cvx exec
(>>) cvx exec
(>>) cvx exec setpagedevice"
*End
*TKColor SimulateDisplay/Simulate Display: "
(<<) cvx exec
/DeviceRenderingInfo (<<) cvx exec
/Type 2
/VirtualColorDevice (<<) cvx exec
/Type 3
/ColorTransform /TekDisplay
(>>) cvx exec
(>>) cvx exec
(>>) cvx exec setpagedevice"
*End
*TKColor SWOPPress/SWOP Press: "
(<<) cvx exec
/DeviceRenderingInfo (<<) cvx exec
/Type 2
/VirtualColorDevice (<<) cvx exec
/Type 3
/ColorTransform /SWOP-Coated
(>>) cvx exec
(>>) cvx exec
(>>) cvx exec setpagedevice"
*End
*TKColor EuroscalePress/Euroscale Press: "
(<<) cvx exec
/DeviceRenderingInfo (<<) cvx exec
/Type 2
/VirtualColorDevice (<<) cvx exec
/Type 3
/ColorTransform /Euroscale-Coated
(>>) cvx exec
(>>) cvx exec
(>>) cvx exec setpagedevice"
*End
*TKColor CommercialPress/Commercial Press: "
(<<) cvx exec
/DeviceRenderingInfo (<<) cvx exec
/Type 2
/VirtualColorDevice (<<) cvx exec
/Type 3
/ColorTransform /Commercial-Coated
(>>) cvx exec
(>>) cvx exec
(>>) cvx exec setpagedevice"
*End
*TKColor Monochrome: "
(<<) cvx exec
/DeviceRenderingInfo (<<) cvx exec
/Type 2
/VirtualColorDevice (<<) cvx exec
/Type 1
/ColorTransform /Gray
(>>) cvx exec
(>>) cvx exec
(>>) cvx exec setpagedevice"
*End
*TKColor UsePrinterSetting/Use Printer Setting: ""
*?TKColor: "
save
{ currentpagedevice /DeviceRenderingInfo get
/VirtualColorDevice get
dup null eq
{ pop (NoAdjust) }
{ /ColorTransform get
(<<) cvx exec
/TekBlue (VividColor)
/TekDisplay (SimulateDisplay)
/SWOP-Coated (SWOPPress)
/Euroscale-Coated (EuroscalePress)
/Commercial-Coated (CommercialPress)
/Gray (Monochrome)
(>>) cvx exec
exch get
} ifelse
} stopped
{ % error in PostScript code execution
pop pop (Unknown)
} if
= flush restore"
*End
*CloseUI: *TKColor
*% Print Quality Selection ===================
*OpenUI *OutputMode/Print Quality: PickOne
*OrderDependency: 50 AnySetup *OutputMode
*DefaultOutputMode: Standard
*OutputMode Fast/Fast Color 600x600 dpi: "
(<<) cvx exec
/HWResolution [600 600]
/ProcessColorModel /DeviceCMY
(>>) cvx exec setpagedevice"
*End
*OutputMode Standard/Standard 600x600 dpi: "
(<<) cvx exec
/HWResolution [600 600]
/ProcessColorModel /DeviceCMYK
(>>) cvx exec setpagedevice"
*End
*?OutputMode: "save
currentpagedevice /ProcessColorModel get /DeviceCMY eq
{ (Fast) }
{ (Standard) } ifelse
= flush restore"
*End
*CloseUI: *OutputMode
*OpenUI *OutputOrder/Output Order: PickOne
*OrderDependency: 60 AnySetup *OutputOrder
*DefaultOutputOrder: Reverse
*OutputOrder Normal/Face Down: "
(<<) cvx exec
/OutputFaceUp false
(>>) cvx exec setpagedevice"
*End
*OutputOrder Reverse/Face Up: "
(<<) cvx exec
/OutputFaceUp true
(>>) cvx exec setpagedevice"
*End
*?OutputOrder: "save
currentpagedevice /OutputFaceUp get
{ (Reverse) }
{ (Normal) } ifelse
= flush restore"
*End
*CloseUI: *OutputOrder
*% Font Information =====================
*DefaultFont: Courier
*Font Courier: Standard "(002.003)" Standard ROM
*Font Courier-Bold: Standard "(002.003)" Standard ROM
*Font Courier-BoldOblique: Standard "(002.003)" Standard ROM
*Font Courier-Oblique: Standard "(002.003)" Standard ROM
*Font Helvetica: Standard "(001.006)" Standard ROM
*Font Helvetica-Bold: Standard "(001.007)" Standard ROM
*Font Helvetica-BoldOblique: Standard "(001.007)" Standard ROM
*Font Helvetica-Narrow: Standard "(001.006)" Standard ROM
*Font Helvetica-Narrow-Bold: Standard "(001.007)" Standard ROM
*Font Helvetica-Narrow-BoldOblique: Standard "(001.007)" Standard ROM
*Font Helvetica-Narrow-Oblique: Standard "(001.006)" Standard ROM
*Font Helvetica-Oblique: Standard "(001.006)" Standard ROM
*Font Symbol: Special "(001.007)" Special ROM
*Font Times-Bold: Standard "(001.007)" Standard ROM
*Font Times-BoldItalic: Standard "(001.009)" Standard ROM
*Font Times-Italic: Standard "(001.007)" Standard ROM
*Font Times-Roman: Standard "(001.007)" Standard ROM
*?FontQuery: "
save
{ count 1 gt
{ exch dup 127 string cvs (/) print print (:) print
/Font resourcestatus {pop pop (Yes)} {(No)} ifelse =
} { exit } ifelse
} bind loop
(*) = flush restore"
*End
*?FontList: "
save (*) {cvn ==} 128 string /Font resourceforall
(*) = flush restore"
*End
*DefaultColorSep: ProcessBlack.60lpi.600dpi/60 lpi / 600 dpi
*% For 60 lpi / 600 dpi ================================
*ColorSepScreenAngle ProcessBlack.60lpi.600dpi/60 lpi / 600 dpi: "0.0"
*ColorSepScreenAngle CustomColor.60lpi.600dpi/60 lpi / 600 dpi: "0.0"
*ColorSepScreenAngle ProcessCyan.60lpi.600dpi/60 lpi / 600 dpi: "0.0"
*ColorSepScreenAngle ProcessMagenta.60lpi.600dpi/60 lpi / 600 dpi: "0.0"
*ColorSepScreenAngle ProcessYellow.60lpi.600dpi/60 lpi / 600 dpi: "0.0"
*ColorSepScreenFreq ProcessBlack.60lpi.600dpi/60 lpi / 600 dpi: "60.0"
*ColorSepScreenFreq CustomColor.60lpi.600dpi/60 lpi / 600 dpi: "60.0"
*ColorSepScreenFreq ProcessCyan.60lpi.600dpi/60 lpi / 600 dpi: "60.0"
*ColorSepScreenFreq ProcessMagenta.60lpi.600dpi/60 lpi / 600 dpi: "60.0"
*ColorSepScreenFreq ProcessYellow.60lpi.600dpi/60 lpi / 600 dpi: "60.0"
*% end of PPD file for Tektronix Phaser 550